Differences

This shows you the differences between two versions of the page.

--- what_is_an_mbr [2018/04/19 06:54]
– gurce
+++ what_is_an_mbr [2018/04/19 22:02] (current)
– [What is an MBR?] gurce
@@ Line 11: / Line 11: @@
 Now, the reason why I referred to the MBR before as being 'optional' was due to the following case.
-What it if we just want a single partition to expand the entire disk's contents. Well, there are two ways of specifying this:
+What it if we just want a single partition to span the entire disk's contents. Well, there are two ways of specifying this:
-  * Have an MBR that specifies just a single partition that spans the entire disk
+  * Have an MBR that specifies just a single partition that spans the entire disk (apart from the first 512 bytes needed for the MBR)
   * Omit the MBR, and just let the single partition span the entire disk (including the first 512 bytes where the MBR would have been)
@@ Line 22: / Line 22: @@
 I believe a fully-fledged Linux install wouldn't have any such trouble reading any FAT32 USB stick, regardless of whether it had an MBR or not. So for now, my suspicions lie in the 'stripped down' nature of the current OS.
+====== Why does my USB stick work first-go, while others have all these problems ======
+It is likely that your USB stick came pre-formatted with FAT32+MBR, saving you from all the headaches that everyone else is experiencing ;)
+====== How can I tell if my USB stick has an MBR or not ======
+Being a techy guy, I tend to figure this out by using linux tools like dd and hexdump, to assess the first 512 bytes of the drive, with a line such as this:
+''dd if=/dev/disk2 bs=1 count=512 2> /dev/null | hexdump -C -v | less''
+There are certain bytes within this chunk that are tell-tale signs of an MBR's existence.
+Doing things this way is probably not to everybody's liking though, so if I learn of easier ways of ascertaining this, I will jot them down for you here.
+====== How do I format without an MBR, so that I can replicate this issue ======
+For testers that want to replicate this issue on their USB sticks, you can format it from linux with a command such as this:
+''mkfs.msdos -I /dev/sdX'' (replacing X with the drive letter of your usb stick)